| Use | Used for car chassis and trucks |
| Destination | It trains various special aggregates (hydraulic pumps, water pumps, mud pumps, fire brigade stacker, concrete mixer drum, drilling aggregates, etc.). The sockets may be independent of the gearbox or flange mounted on them. |
| Runtime | – 6000 ore – For independent mounting – Equal to the service life of the gearbox on which it is flushing |
| Runtime until the capital repair | – 3000 ore – For independent mounting – Equal to the service life of the gearbox on which it is flushing |
| Maximum transmitted moment | 1000 Nm |
| Type of coupling | Crawled or synchronized |
| Transmission reports | i=0.72; i=1; i=1.21 |
| Coupling mode | Empty |
| Coupling command | Manual or electropneumatic |
| The amount of oil | – 17 dm³ – Together with the gearbox – 6.5 dm³ – For independent mounting |
| Net weight | approx. 125 kg |
| Unction | Mixed by bubbling and under pressure |
| Type of lubrication pump | With lobes |
Power Outlet P 100
Coefficients for calculation of speeds at power outlets
| Gearboxes families | Gearbox transmission reports | Permanent gearbox | Permanent gear GV80;M100 |
P 100 | ||||
| 0.72 | 1.00 | 1.21 | ||||||
| Numbers of teeth | 21/29 | 29/29 | 35/29 | |||||
| RD | Arb | RD | Arb | The engine speed is multiplied by the coefficient in the table corresponding to the gearbox type and the power take-off resulting in the power take-off speed | ||||
| 5C/S-100 | 7.53-1.00 | 50 | 22 | 1.38 | 1.00 | 0.83 | ||
| 5C/S-100 | 5.21-1.00 | 44 | 28 | 1.38 | 1.00 | 0.83 | ||
| 5C/S-100 | 5.21-0.71 | 44 | 28 | 1.38 | 1.00 | 0.83 | ||
| 9S-125PL | 13.38-1.00 | 41 | 31 | 1.38 | 1.00 | 0.83 | ||
| 9S-125PR | 9.84-0.74 | 35 | 36 | 1.38 | 1.00 | 0.83 | ||
| 16S-140PL | 13.81-1.00 | 39 | 32 | 1.38 | 1.00 | 0.83 | ||
| 16S-160PR | 11.66-0.85 | 44 | 50 | 1.38 | 1.00 | 0.83 | ||